Facilities List

Total Square Feet:

Offices: 14,000 Sq. Ft.
Manufacturing & Assembly Area: 110,000 Sq. Ft.

Lindquist Building

ASSEMBLY CAPABILITIES

(7) 5 to 25 ton overhead cranes (20.5’ under hook) Forklifts to 11,000#
(4) Assembly areas of 10,000 square feet each
Outside riggers available for heavier loads

CNC EQUIPMENT

(1) Toshiba Model BMC-50B Horizontal Machining Center with Tosnuc 600 MB controls.
Travels: X=28”, Y=23”, Z=23”. Table size: 19” x 19”. Magazine capacity = 40. 15 H.P.
(1) SuperMax Max 4XP.
Travels: X=43.3”, Y=23.6”, Z=24.8”.
(1) Mazak Model V-15 Vertical Machining Center with Fagor 8050M control.
Travels: X=80”, Y=29.8”, Z=30”. Table size: 30” x 80”. Magazine capacity = 20. 15 H.P.
(1) OKK Model PCV-40 Vertical Machining Center with OKK CNC control, including full fourth axis interface.
Travels: X=30”, Y=16.2”, Z=20”. Table size: 16” x 28”. Magazine capacity = 18.
(2) OKK MCV Model 520’s Vertical Machining Center with full 4th axis.
Travels: X=40”, Y=20”, Z=20”.
(2) OKK MCV Model 650’s Vertical Machining Center with full 4th axis.
Travels: X=50”, Y=25.6”, Z=25.6”
(1) SuperMax 3 Vertical Machining Center with 15 HP two speed gear head.
Travels: X=40”, Y=17.3”, Z=24.8”.
(1) Mori-Seiki Machining Center. MV-JR with Yasnac MX3/Moric-2Y control.
Travels: X=22”, Y=16.1”, Z=18.1”. Table size: 35.4” x 17.7”. Magazine capacity = 20.
(4) Leblond Makino AMC 55 with Heidenhain controls.
Travels: X=21.65”, Y=12.59”, Z=13.8”.
(1) Mori-Seiki Model SL-5 Slant Bed Lathe with Yasnac 2000G II control and Rohm face drivers and 12” power chuck. Swing over bed = 14”. Swing over slide = 12”. Distance between centers = 42”. Hole through spindle = 2.6”. 20 H.P.
(1) Mori-Seiki Model SL-15 Slant Bed Lathe with Yasnac LX3/Moric-J control and 6” power chuck. Swing over bed = 17.7”. Swing over cross slide = 11.8”. Distance between centers = 20.7”. 11 H.P.
(1) Mazak Power Master Universal Model 3000U Lathe. Swing over bed - 30”. Swing over cross slide = 18”. Distance between centers = 123”. Hole through spindle 4.6”. 60 H.P.
(1) Mazak Model Power Master N: 60 H.P. 100” bed, swing = 34”. Swing over crosslide = 22”.
(2) Mori-Seiki SL-25’s with 12” chuck, 12” diameter, 42” Distance between centers, 2.6 diameter through hole.
(1) Dainichi F35-1250 CNC Lathe 15” chuck, 14.5” diameter, 2500 RPM, 40” Distance between centers.

CNC BORING BARS

(1) Toshiba BTD-11 Table Type Horizontal Boring Machine with Tosnuc-2 MDI-NC control and rotary table. Travels: X=70”, Y=59”, Z=56”. Table size: 55” x 63”. Maximum table load 13,860#. 20 H.P.
(1) Cincinnati-Gilbert Model HJF Horizontal Boring Machine with GE Mark Century control and rotary table. Travels: X=360”, Y=120”, Z=92”. Table size: 72” x 96”. 30 H.P.
(1) Machinery Systems Model H-200 Horizontal Machining Center: 4 pallets. Pallet size: 39” x 56”, Travels: X=120”, Y= 69”, Z= 58”

MANUAL BORING BARS

(2) Nomura Model B-100-WP Horizontal Boring Bars with (3) axis readout.
Travels: X=96”, Y=72”, Z=26”, W=41”. Table size: 48” x 96”. Max table weight 13,200#. 20 H.P.
(1) Nomura Model B-100-SR Horizontal Boring Bar with motorized rotary table and (3) axis readout.
Travels: X=50”, Y=50”, Z=26”, W=43”. Table size: 45” x 50”. Max table weight 11,000#. 20 H.P.
(2) Toshiba Model Horizontal Boring Bar with (3) axis readout.
Travels: X=118”, Y=83”, Z=63”, W=35”. Table size: 60” x 118”. 25 H.P.
(1) Lucas Model Horizontal Boring Bar with 26” diameter Troyke turn table and (2) axis readout. Travels: X=48”, Y=48”, Z=52”. Table size: 36” x 60”. 25 H.P.

GRINDERS

(1) Churchill Model “D” O.D. Grinder with 2 axis readout. Max diameter = 18”. Distance between centers = 144”.
(1) Kellenberger. Max diameter = 15”. Distance between centers = 37.5”.
(1) Okamoto Surface Grinder. 16” x 32”.
(1) Chevalier Surface Grinder. 12” x 36”.

PAINT BOOTHS

(1) Binks Paint Spray booth 14’ x 14’ x 24’ deep.

MISCELLANOUS

(1) Planer Mill, 38” x 140” Table with 42” x 42” opening.
(1) Planer Mill, 68” x 272” Table with 72” x 48” opening.

FABRICATING EQUIPMENT

(1) Flow Flying Bridge CNC Waterjet. 50hp Single head, 6’ x 12’ table can cut through 6” material
(1) Accushear Hydraulic Power Shear Model 8200012. 1/2 ”x12’
(1) Promecam Hydraulic Press Brake. 1/4 ” x 12’ w/automec CNC back-gauge
Geka Puma 55 Ton Ironworker Press
Wysong 10’ Power Slip Rolls
TIG Welders
MIG Welders
Plasma Cutters
Stud Welders
(1) Spot Welder

PROCESS CONTROL EQUIPMENT

(1) Mitutoyo Model B715 Coordinate Measuring Machine with IBM microprocessor running GEOPAK 1000 software.
Travels: X=28”, Y=60”, Z=24”.
(2) Surtronic/Taylor Hobsen Profilometer
(1) Surtronic 3+ Digital Profilometer (computer accessible)
(8) Granite Inspection Tables
(3) Digi-Height Verniers

Full complement of dial indicators, parallels, gauge blocks, dial bore gauges, ring & pin gauges, sine bar, etc.

ISO 9001:2000